This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/880745/tusb1210evm-how-can-i-change-vddio-to-3-3v
如何将 VDDIO 更改为3.3V？ 在 EVM 原理图上、它牢固地连接到1.8V。 切割线迹并将导线手动焊接到引脚32是否足够？
你(们)好
TUSB1210的 VDDIO 必须在+1.8V±10%的范围内、不支持3.3V。
谢谢
David
