This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN65DP159:SN65DP159

Guru**** 2008950 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/798370/sn65dp159-sn65dp159

器件型号:SN65DP159

我们将 DP159用作 DisplayPort 重定时器。 通道数为2。

我们想知道 DP159的哪些引脚应连接 DisplayPort 的通道0和通道1。

从 http://e2e.ti.com/support/interface/f/138/p/541411/1980162 和 https://e2e.ti.com/support/interface/f/138/p/795986/2944143?tisearch=e2e-sitesearch&keymatch=DP159%20lanes#2944143这两个主题中 、我们得到了两个不同的答案。

请支持。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    Shaji

    请参阅此应用手册 :www.ti.com/.../slla358.pdf。 通道0需要连接到 IN_D2p/n 或 IN_CLKp/n、以便 DP159可以从中恢复时钟。

    谢谢
    David