请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TCA9546A 大家好、
当 TCA9546A 处于断电状态时、是否可以向 I2C 引脚(SDA、SCL)施加高电平?
我还想了解 A0-A2引脚的情况。
我认为这不是一个被遗忘的地方、因为以下绝对最大值描述、但我想在情况下确认。
此致、
雅丽塔/日本地区
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.