This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN65DSI86:器件关闭后的 I2C 引脚状态

Guru**** 2455560 points
Other Parts Discussed in Thread: SN65DSI86

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/607932/sn65dsi86-i2c-pin-status-after-the-device-is-off

器件型号:SN65DSI86

团队、  

一位客户想知道器件断电时 I2C 引脚的状态(即上拉、下拉、漏极开路或高阻抗)是什么。  

此致、  

Leroy  

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好、Leroy、
    当 SN65DSI86断电时、I2C 总线为高阻抗、以确保其余 IC 之间的通信能够继续。
    此致、
    Joel