请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPD6F003 您好!
TPD6F003的频率响应如下所示。 根据数据表、我知道带宽为200MHz。
1.刀片损耗为何从一开始就为-6dB? 是由负载造成的?
2.在100MHz 时可以实现90%的振幅吗?
3、如果我连接两个板、每个板有一个 TPD6F003、带宽是多少? 100MHz 时的振幅是多少?
谢谢。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.