This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1184124/tusb8041-schematic-check
请帮助查看原理图是否正确？
e2e.ti.com/.../TUSB8041IRGCR_5F00_SCH_5F00_20221230.pdf
您好 Tony：
1：上行端口连接到、主机或 UBS 连接器的位置？
2：OCP 需要上拉至3.3V、而不是5V
3：由于您支持电源开关、引脚40需要下拉。
其他看起来不错。
此致
Brian
