This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DP83848J:我应该将散热焊盘接地还是将其悬空?

Guru**** 2387080 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1187961/dp83848j-should-i-connect-thermal-pad-to-ground-or-left-it-unconnected

器件型号:DP83848J

您好!

我打算在我的项目中使用部件 DP83848JSQ/NOPB。 它有一个散热焊盘。 我在数据表中找不到以下信息:在电路板上,应该将其散热焊盘焊接到接地上,还是应该将其焊接在未连接的焊盘上?

谢谢。

此致、

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Victor:

    散热焊盘应接地。 您可以使用数据表中的焊盘图案作为设计示例。

    --
    此致、
    Gokul。