This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DS280BR820:限幅器模式输入信号幅值

Guru**** 2383980 points
Other Parts Discussed in Thread: DS280BR820
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/743899/ds280br820-limiter-mode-input-signal-amplitude

器件型号:DS280BR820

DS280BR820产品文档似乎没有概述限幅器模式所需的最小输入信号振幅(Vdpp)。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    Daniel、您好!

    DS280BR820可在限幅模式下使用相对较低的振幅输入产生一个满输出振幅信号。 通常、小于100mVpp 就足够了。

    DS280BR820 Rx CTLE 的最佳 Tx 启动幅值在600-1000mV 范围内。 预计该 Tx 振幅将由输入传输线路损耗衰减。

    此致、
    Lee