请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:EP 驱动100欧姆差分负载时、是否需要在 LVDS 输出端使用一个输出串联电阻?
输出负载显示为5欧姆、那么一个45欧姆的串联电阻器应该有助于消除反射?
-迈克尔
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
驱动100欧姆差分负载时、是否需要在 LVDS 输出端使用一个输出串联电阻?
输出负载显示为5欧姆、那么一个45欧姆的串联电阻器应该有助于消除反射?
-迈克尔