大家好。
DP83822IF 光纤驱动器的搭接设置
测试后、RX_D0和 RX_D1的下拉带不能正常工作
如果使用 RH 2.49K 上拉电阻施加 RX_D0的下拉自举、则设置数据表 模式4
如果您检查实际的寄存器 设置为 Mode_1、
数据表是否错误?
使用光纤模式时、数据表未规定 RX_D0和 RX_D1使用上拉2.49k
请向公司核实
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.