https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1380287/ds320pr1601-redriver
器件型号:DS320PR1601工具与软件:
您好!
通道映射是否更改了双通道应用?
如何为 x2端点映射 PD 引脚和通道? (8 x 2)
谢谢。此致、
Shekha Shoukath
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1380287/ds320pr1601-redriver
器件型号:DS320PR1601工具与软件:
您好!
通道映射是否更改了双通道应用?
如何为 x2端点映射 PD 引脚和通道? (8 x 2)
谢谢。此致、
Shekha Shoukath
尊敬的 Shekha:
请参阅 DS320PR1601数据表第22页的图。
每个 PD 引脚均为一组8条通道(A 侧4条、B 侧4条)设置控制、以提供 x4和 x8分叉的灵活性:
•PD_15-12:通道 x15-12、A 侧和 B 侧
•PD_11-8:通道 x11-8、A 侧和 B 侧
•PD_7-4:通道 x7-4、A 侧和 B 侧
•PD_3-0:通道 x3-0、A 侧和 B 侧
可以 利用 RX 检测复位来按通道控制 PD 引脚。 如果您还有其他问题、请告诉我。
此致!
Nick