This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74AUP1G97:压力规格

Guru**** 2468460 points
Other Parts Discussed in Thread: SN74AUP1G97

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1547109/sn74aup1g97-pressure-specification

器件型号:SN74AUP1G97


工具/软件:

您能否提供 SN74AUP1G97 在已焊接到主板上时可以承受的压力规格?  我们需要这些信息来确保在 SSD 和主板之间添加散热垫不会因施加的压力而损坏组件。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Chen-Yu:

    我们的器件没有这方面的规格。 与使用的不同、这可能更多地取决于电路板和焊料。

    此致、

    Owen