请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1094388/sn74lvc1g18-leakage
部件号:SN74LVC1G18您好,
如果所有其它引脚都连接到1.8V电平,我是否可以将选择引脚连接到3.3V? 是否会发生泄漏?

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1094388/sn74lvc1g18-leakage
部件号:SN74LVC1G18您好,
如果所有其它引脚都连接到1.8V电平,我是否可以将选择引脚连接到3.3V? 是否会发生泄漏?

您好,Shay,
请在此处查看有关此主题的常见问题解答: 我的逻辑设备的输入电压(VI)是否可以高于电源电压(Vcc)?