This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TXS0108E-Q1:Txs0108e:推挽和漏极开路

Guru**** 2577385 points
Other Parts Discussed in Thread: TXS0108E

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1017936/txs0108e-q1-txs0108e-push-pull-and-open-drain

器件型号:TXS0108E-Q1
主题中讨论的其他器件:TXS0108E

大家好、

  Txs0108e 的最大数据速率为110Mbps (推挽)和1.2Mbps (开漏)、现在为2Mbps 串行端口通信速率、我是否需要添加推挽电阻器?

 谢谢、此致

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    电阻器不是推挽驱动器。 您需要一个能够主动驱动高电平的器件。

    您要连接哪些设备? 每个信号的电压和方向是什么?