This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74LVC2G17-Q1:长迹线后的输出信号

Guru**** 2538950 points
Other Parts Discussed in Thread: SN74LVC2G17-Q1

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/986467/sn74lvc2g17-q1-output-signal-after-long-trace

器件型号:SN74LVC2G17-Q1

大家好、

我们使用 SN74LVC2G17-Q1作为缓冲器来增强信号驱动能力。 但在长迹线之后、信号波形将更糟。 因此、我们 在末尾放置并联终端电阻器 但电阻很小(=90欧姆)、我们担心电阻可能会导致额外的热问题。 您对此问题有什么想法吗?

罗伊