This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TXS0108E:TXS0108EPWR

Guru**** 2553450 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/689382/txs0108e-txs0108epwr

器件型号:TXS0108E

是否有人知道输入应该直接接地或电源轨以获得有效的输入电平?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好、Abdel、

    为了澄清这一点、您是否询问如何处理未使用的输入? 这是一个转换器、它接受较低的电压、并将其转换为较高的电压或其他方式。