请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:SN74HCS00 您好!
是否可以在 VCC=5V 时将此器件与3.3V 逻辑输入搭配使用?
根据数据表中的 Vt+规格、VCC=4.5V 时、Vt+(max)=3.15v;VCC=6V 时、Vt+(max)=4.2V、和
VCC=5V 时没有规格。
此致、
H.Someno
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好!
是否可以在 VCC=5V 时将此器件与3.3V 逻辑输入搭配使用?
根据数据表中的 Vt+规格、VCC=4.5V 时、Vt+(max)=3.15v;VCC=6V 时、Vt+(max)=4.2V、和
VCC=5V 时没有规格。
此致、
H.Someno
Hidekazu、您好!
此常见问题解答应有助于解决此问题: https://e2e.ti.com/support/logic/f/151/t/793508?tisearch=e2e-sitesearch&keymatch=faq%3Atrue。
由于没有太大的裕度、因此您需要确信输入信号始终达到3.3V。该器件具有非常低的输入泄漏、因此它本身不会影响压降。