• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 0 subscribers
  • Views 65 views
  • Users 0 members are here
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74LVC1G125：OrCAD (PSpice import .cir/olb)模型错误：值必须是单调增加

admin
Guru**** 1507300 points
Other Parts Discussed in Thread: SN74LVC1G125
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1343239/sn74lvc1g125-orcad-pspice-import-cir-olb-model-error-values-must-be-monotonic-increasing

器件型号：SN74LVC1G125

大家好、我已经从 TI 产品页面下载了模型、并将其导入 OrCAD (import/Pspice/.cir、然后通过库打开.olb)。 仿真未完成并指示错误"值必须呈单调增加"。 我在此论坛中搜索并使用了以下主题中较新的.cir：

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/979457/sn74lvc1g125-pspice-model-error-values-must-be-monotonic-increasing

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1057950/sn74lvc16244a-spice-model-does-not-work-in-pspice?keyMatch=IMPORTING%20TI%20PSPICE%20MODELS%20INTO%20ORCAD

但我仍然有相同的信息： "值必须是单调增加"

您能提供一些解决问题的指导吗？