This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430FR6047:需要有关设计原理图的帮助。

Guru**** 2387830 points
Other Parts Discussed in Thread: MSP430FR6043, MSP430FR6047
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1110741/msp430fr6047-need-help-to-designing-the-schematic

器件型号:MSP430FR6047
主题中讨论的其他器件:MSP430FR6043

尊敬的 TI:  

我们观察到 MSP430FR6043 MSP430FR6047的设计文件、发现在 FR6043中、您分别在 MCU_VCC 和 AVCC1、DVCC1、DVCC3之间使用了600E 的 L1、L2、L3。 在 FR6047中、 我们观察到 MCU_VCC 及其接地端之间没有分别连接电感器。 尽快需要帮助。  

提前感谢。  

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!  

    对于 FR6047、无需在 VCC 和 GND 之间添加电感器。 但是、对于燃气表应用中的 FR6043、换能器上的激励电流大于水表应用中的激励电流。 因此、电感器可以降低 VCC 上的电压抖动  

    此致、

    现金 Hao