This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430FR2633:关于 CapTIvate 的电荷传输周期

Guru**** 2388080 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/885741/msp430fr2633-about-charge-transfer-cycles-of-captivate

器件型号:MSP430FR2633

你好。

我正在阅读以下文档。

http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/CapTIvate_Design_Center/latest/exports/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/ch_technology.html

根据上述文档、我的以下理解是否是收集的?

->在 procedure①~④中 ,在激活模式操作过程中,过程② 包括电荷转移周期。

如果我的理解是收集、转换时间会因电荷传输周期的数量随测量电容的变化而变化。

是否收集以上信息?

此致、

U-SK

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、U-SK、

    您完全正确。  当电极被触摸时、充电周期的数量将增加(互电容模式)或者减少(自电容模式)。