This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430FR6972:电容式触控低功耗模式

Guru**** 2386620 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/587212/msp430fr6972-cap-touch-low-power-mode

器件型号:MSP430FR6972

您好!

一直在搜索文档、没有找到清晰的答案。  在允许电容式触控外设中断处理器的同时、可实现的最低功耗模式(LPM0、LPM1等)是什么?

此致、

Jake

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    你好、Jake、

    这取决于您用于为 WDT 或 TA0供电的时钟源以及您何时进入 LPM。 如果 ACLK、则可以使用 LPM3、否则为 LPM0。

    此致、
    Ryan