This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/623492/msp430f67751a-xt1bypass-is-not-set-but-used-oscillator-as-input
您好！
我没有设置 XT1BYPASS。 但我使用了一个方波振荡器作为 XIN 的输入
微控制器工作正常。
这是错误的
此致
Subbu
