This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CCS/MSP430F4152:msp430f4152

Guru**** 2040210 points
Other Parts Discussed in Thread: MSP430F4152
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/739931/ccs-msp430f4152-msp430f4152

器件型号:MSP430F4152

工具/软件:Code Composer Studio

您好!

我使用的是 MSP430F4152。

我想以600bps 的速率使用它。它的波特率是多少(UCA0BR0)。

以及 UCA0MCTL 值。

(我只想在600bps 时使用它)

并希望签入 serila 监视器。

请告诉我。

此致、

Srijit

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好!
    很抱歉出错了。
    我想在串行监视器中对其进行测试。
    (不是 serila 监视器)。

    Srijit
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好!

    有关 UART 通信的问题、请参阅以下应用手册:
    http://www.ti.com/lit/slaa734

    另请参阅我们的 UART 波特率计算器工具。 有关 UART 波特率的其他信息、请参阅器件用户指南。
    processors.wiki.ti.com/.../USCI_UART_Baud_Rate_Gen_Mode_Selection

    另请参阅我们的器件特定示例、了解如何设置 UART。
    dev.ti.com/.../