主题中讨论的其他器件:UNIFLASH、
当尝试通过 JTAG 与 FET-Pro430进行通信时、我看到:
JTAG 通信初始化... 失败
…安全保险丝... 失败
---------------- 失败!!! ----------------
我使用的是 MSP-FET430闪存仿真工具。 我目前运行的是3.11.00.001 FET-Pro430 (FET MSP430闪存编程器)。
是否有任何关于我可能犯了什么错误从而阻止 JTAG 工作的想法?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
当尝试通过 JTAG 与 FET-Pro430进行通信时、我看到:
JTAG 通信初始化... 失败
…安全保险丝... 失败
---------------- 失败!!! ----------------
我使用的是 MSP-FET430闪存仿真工具。 我目前运行的是3.11.00.001 FET-Pro430 (FET MSP430闪存编程器)。
是否有任何关于我可能犯了什么错误从而阻止 JTAG 工作的想法?
您好
我建议使用其他软件工具作为测试、有时开关会帮助触发自动固件更新。
谢谢!
大家好,Sohan Gowda M
>>器件的调试接口已保护
我想知道您是否又有一个 MSP430F249来测试此方法吗?
>>我尝试过 Uniflash 编程软件
您能否测试 CCS www.ti.com/.../CCSTUDIO 是否 可以正常连接 FET-Pro430和目标 MCU MSP430F249
谢谢!