超声波传感器直接连接到 MPS430FR6047微控制器。 换能器的驱动电压是多少? 我想它将是微控制器的电源电压、但我尚未在任何文档中找到对此的确认。
另外、换能器电源 Jiakang 表示、对于金属管、可能需要更高的驱动电压。 我假设它们的意思是高于典型建议的3.3Vpp 或5Vpp。 如果我需要将更高的电压驱动到传感器、关于如何执行此操作、有什么指导吗?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
超声波传感器直接连接到 MPS430FR6047微控制器。 换能器的驱动电压是多少? 我想它将是微控制器的电源电压、但我尚未在任何文档中找到对此的确认。
另外、换能器电源 Jiakang 表示、对于金属管、可能需要更高的驱动电压。 我假设它们的意思是高于典型建议的3.3Vpp 或5Vpp。 如果我需要将更高的电压驱动到传感器、关于如何执行此操作、有什么指导吗?
尊敬的 Anthony:
此外,换能器供应公司 Jiakang 也表示,对于金属管,可能需要更高的驱动电压。 我假设它们的意思是高于典型建议的3.3Vpp 或5Vpp。 如果我需要将较高的电压驱动到传感器、是否有相关指导?
关于在更高电压下驱动的问题、您可能需要查看此主题: https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1111257/msp430fr6047-external-amplifier-to-increase-the-drive-voltage-and-amplify-received-signal/4119095
该主题指向的参考设计 TIDA-01486显示了如何针对高达12V 的电压完成此操作。
此致、
布兰登·费舍尔