请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:MSP430FR6043 我已经将电路板 EVM430FR6043连接到了笔记本电脑、在这里、我使用的是气体模式、其中显示 HID 桥已连接-正在等待器件...并且由于脉冲生成参数无效而显示错误
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我已经将电路板 EVM430FR6043连接到了笔记本电脑、在这里、我使用的是气体模式、其中显示 HID 桥已连接-正在等待器件...并且由于脉冲生成参数无效而显示错误
尊敬的 Raja:
这表明您刷写到器件中的某些设置无效。 我的建议是重新刷写器件、恢复到 EVM 的默认设置。 您可以在 USS 设计中心用户指南中的 GUI 中找到每个参数的限制/范围。