This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS7A56:启用电压

Guru**** 2837190 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1601904/tps7a56-enable-voltage

器件型号: TPS7A56

尊敬的专家:

使能信号可以高于 Vin 电压吗?

谢谢!

McKenna

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    嘿、McKenna、

    是的、EN 电压可以大于 VIN。 在这种用例下、器件没有风险。

    谢谢、

    Vahnroy

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Vahnory:

    该引脚可以处理的最大电压是多少?

    谢谢您、

    McKenna

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    嘿、McKenna、

    EN 引脚最高可处理 6.5V 的电压。

    谢谢、

    Vahnroy