请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
部件号:BQ2.4092万 dears,
在电路中,充电电流设置为115mA,但现在它是异常的,高于400mA。
针脚9 (TS) 设置为低电平,充电停止。
测试所有引脚到GND的阻抗,阻抗 正常。
更换IC,电路正确。
那么为什么以及如何解决这个问题呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
dears,
在电路中,充电电流设置为115mA,但现在它是异常的,高于400mA。
针脚9 (TS) 设置为低电平,充电停止。
测试所有引脚到GND的阻抗,阻抗 正常。
更换IC,电路正确。
那么为什么以及如何解决这个问题呢?