This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1101294/ref5010-convergence-issues-with-simulating-dual-power-supplies-using-the-ref5010
我想使用REF5010来生成+-5V参考来为 INA821供电，我提到了"使用电压参考进行设计的提示和技巧"。
但当我模拟电路时，他说存在收敛问题。 我在哪里做错了？ 是否因为REF5010的电流不足以为INA821供电？ 请帮帮我 感谢大家的帮助。
e2e.ti.com/.../TEST01.zip
你(们)好
我会检查并告知您。
此致
Trailokya
请参阅以下帖子：
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/109.93万/ref5050-pspice-for-ti-cannot-simulate--5v-using-ref5050</s>5050 5050
