This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] UC2875:斜率补偿&放大器;电流模式

Guru**** 2390710 points
Other Parts Discussed in Thread: UC2875, UCC28950
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1112202/uc2875-slope-compensation-current-mode

器件型号:UC2875
主题中讨论的其他器件: UCC28950

您好!

在受辐射影响的电子元件中、我 必须在 具有斜率补偿的电流模式中使用 UC2875。

数据表未提供有关电流模式和斜率补偿的足够信息。

您能否向我解释一下如何选择 V (Rslope)、Rslope 和 cramp 以实现最佳系统?

是否可以通过应用示例帮助我进行设计?

我没有其他组件选择。

提前感谢、

Baptiste、

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    UCC2875是 TI 最旧的相移全桥(PSFB)控制器之一。  很抱歉、它没有太多设计信息。  然而、UCC28950/1有一个关于如何设计 PSFB 的应用手册、甚至还有一个关于斜率补偿的部分。  您可以在以下链接中找到它。  

    https://www.ti.com/lit/pdf/slua560

    此致、