This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1117476/ucd90320u-ucd90320u-pin-function
你(们)好
1.我想在 Fusion 设计工具 中将 MAR2引脚设置为 GPI 引脚。 如何做到这一点？
2.如何在 Fusion 设计工具中添加 MAR5作为 GPI 功能？
谢谢
Mike
所有 MARx 引脚均可配置为 GPI 功能。
请参阅此培训视频 ：https://training.ti.com/fusion-power-designer-add-and-configure-gpi-input?context=1136655-1139495-1136647
本视频以 UCD9090A 为例、但 UCD90320U 的过程相同。
此致
Yihe
完全理解
