请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS56121 大家好、
我们的客户在 Webench 中仿真了 TPS56121、仿真后他尝试导出设计、但页面底部显示"错误失败"消息。 为什么导出设计时出现错误?
此致、
Danilo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我向建模团队报告了该问题。 同时、可以使用导出按钮旁边的仿真按钮或使用此处产品文件夹中的 Tina 模型来运行仿真