• 状态
  • 已锁定 已锁定
  • 回复 0 回复
  • 订户 0 订户
  • 视图 163 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答] UCD90xxx 处于复位状态时 IO 引脚的状态是什么？ UCD90xxx

admin
Guru**** 2325560 points
Other Parts Discussed in Thread: UCD90320U, UCD90320, UCD90240, UCD90120A, UCD9090, UCD90160A, UCD90160, UCD90120, UCD9090A, UCD90124, UCD90124A
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1051026/faq-what-are-the-states-of-io-pins-when-the-ucd90xxx-is-under-reset-ucd90xxx

主题中讨论的其他器件：UCD90320、 UCD90320U、 UCD90120A、 UCD9090、 UCD90160A、 UCD90160、 UCD90120、 UCD9090A、 UCD90124、 UCD90124A

UCD90320U、UCD90320和 UCD90240器件的所有 IO 引脚均处于高阻态。 对于 UCD90xxx 系列的其余产品、FWPM 引脚处于驱动低电平状态、其余 IO 处于高阻态。

有关更多常见问题解答、请查看以下文档。

UCD90xxx 系列常见问题解答 

UCD9090 UCD9090A UCD90120 UCD90120A UCD90124 UCD90124A UCD90160 UCD90160A UCD90240 UCD90320 UCD90320U