• 状态
  • 已锁定 已锁定
  • 回复 0 回复
  • 订户 0 订户
  • 视图 137 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答]为什么电源轨在重新启动后不会重新定序？ UCD90xxx

admin
Guru**** 2304850 points
Other Parts Discussed in Thread: UCD90120A, UCD9090, UCD90160A, UCD90160, UCD90240, UCD90320U, UCD90120, UCD9090A, UCD90124, UCD90124A, UCD90320
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1050990/faq-why-do-rails-not-re-sequence-after-restart-is-exhausted-ucd90xxx

主题中讨论的其他器件：UCD90120A、 UCD9090、 UCD90160A、 UCD90160、 UCD90320U、 UCD90120、 UCD9090A、 UCD90124、 UCD90124A、 UCD90320

在所有重新定序电源轨都低于 POWER_Good 关闭阈值之前、无法开始重新定序。 确保所有重新定序电源轨均已正确关闭。

有关更多常见问题解答、请查看以下文档。

UCD90xxx 系列常见问题解答 

UCD9090 UCD9090A UCD90120 UCD90120A UCD90124 UCD90124A UCD90160 UCD90160A UCD90240 UCD90320 UCD90320U