This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答] BQ25120A:能否通过 GPIO 从外部驱动/MR 引脚?

Guru**** 2304850 points
Other Parts Discussed in Thread: BQ25120A, BQ21061
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1047309/faq-bq25120a-can-i-drive-the-mr-pin-externally-through-a-gpio

器件型号:BQ25120A
主题中讨论的其他器件: BQ21061

手动复位输入(/MR)在内部上拉至 BAT。 要使用微控制器(MCU)驱动信号、您可以使用 N 沟道 MOSFET (NMOS)模拟 MCU 的"按压"操作。 下图显示了连接。 请参阅 BQ21061应用手册的第3节、其中包括此应用的示例、也适用于 BQ25120A。

BQ21061 SFF 应用手册链接: https://www.ti.com/lit/an/slua996/slua996.pdf

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    关闭常见问题解答帖子、谢谢!