This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS546D24A:PSpice for TI 仿真错误

Guru**** 669750 points
Other Parts Discussed in Thread: TPS546D24A
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1013713/tps546d24a-pspice-for-ti-simulation-error

器件型号:TPS546D24A
主题中讨论的其他器件: TPS544B20
大家好 、
我是来自印度北部和西部工业团队的销售和应用团队的 Akash Tripathi。
 
这 涉及 到我的一位客户尝试 在    PSPICE for TI 上模拟 TPS546D24A。 输出电压为 1.8V、但存在一致的误差-  
"在器件 L_L2中除以零、除以"。  
我正在附加仿真文件、您能不能看看可能出现的问题吗?
 
感谢您的支持。
 
此致、
Akash Tripathi
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

     

    我们的 PSpice for TI 团队审查了您的项目、发现实施交流注入的方式会导致电感器电流出现收敛错误。

    他们将更新环路注入方法以解决此问题。  我将通过电子邮件向您发送一份包含更新循环注入的项目副本