请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:UCC28610 尊敬的香榭丽舍
对于 UCC28610、是否有方法在器件开始工作时计算 Bulk 电压?
我们知道工作情况由 Vdd 引脚上的电压决定、但此时是否有任何方法计算大容量电压?
谢谢、
Brian
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好!
我在数据表中找不到这些信息、但在 Excel 设计工具中找到了这些信息。
VIN*NA/NP > IVSLrun*RVS1控制器将知道输入电压足够高。 IVSLrun = 225uA
器件具有历史记录、因此器件将在何时停止运行
VIN*NA/NP < IVSLSTOP*RVS1、其中 IVSLSTOP = 80uA、
以下链接将带您进入 Excel 设计工具。
https://www.ti.com/lit/zip/sluc113
此致、