This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/906505/ev2400-how-to-use-ev2400-in-the-automated-mode-of-bq-studio-to-complete-the-learning-cycle
大家好、
我在 BQ Studio 中看到了自动模式。
它需要两个连接到通信适配器可选引脚的继电器。
请附上 原理图、以指导如何设置自动模式。
Thx
此致
阿伦·高
Junkai 您好！
目前不支持自动模式。
