This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS22860:所有输入引脚的电压都正确、但输出电压不正确

Guru**** 2382480 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/760243/tps22860-all-input-pins-are-at-correct-voltages-but-the-output-voltage-is-incorrect

器件型号:TPS22860

输入电压和 Vbias 都是在3.3伏下测量的。 ON 引脚也会获得3.3伏的电压。 GND 引脚接地。 Vin 和接地之间连接了一个1uF 电容器。 我预计 Vout 约为3.3伏、但它提供低电压(~0.7伏)。 该电路类似于以下示例: