This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/834873/tps25982-how-to-connecting-nretry-pin
您好！ 是否建议在 RETRY 引脚断开(故障响应锁存时)时连接 nRetry 引脚？ 打开？ 或对地短路？ 此致、 YUto Sakai
您好、 Sakai、
要针对故障锁存器件、请将 RETRY 引脚连接至 GND。 n 重试引脚位置无关紧要、它可以保持开路或 对地短路。
请参阅 数据表中的表3。
此致、Rakesh
