请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS650861
使用 EVM、BOOSTXL-TPS650861或定制电路板评估 TPS650861器件时、务必首先使用 OTP 发生器工具对器件进行编程、该工具可在 TI.com 的产品页面上找到、并在以下常见问题解答中链接。 即使您不希望将设置刻录到一次性可编程(OTP)存储器中、器件仍需要根据 OTP 发生器工具设置所有寄存器。
这个初始编程步骤是必要的、这是因为数据表中没有显示由 OTP 发生器工具设定的寄存器。 有关使用 OTP 发生器工具的说明、请参阅下面链接的《TPS650861非易失性存储器编程指南》第4节。
相关文档链接:
电源培训小程序码