This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS794:Pin3 (FB)的固定版本引脚处理

Guru**** 2387080 points
Other Parts Discussed in Thread: TPS794
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/732939/tps794-fixed-version-pin-treatment-of-pin3-fb

器件型号:TPS794

TPS79433DGNT

使用 MSOP 固定版本时、请告知我们如何对 Pin3 (FB)进行引脚处理。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Kura、

    对于 TPS794系列的固定电压版本、请将 FB 引脚(引脚3)视为 DNC (请勿连接)引脚。 该引脚应保持悬空、并且未连接到任何电压轨、包括 GND。

    非常尊重、
    Ryan