请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:UCC25230 尊敬的 TI 工程师:
这是原理图、它使用 UCC25230 作为从36V-72V 转换为9V 的辅助电源转换芯片、问题在于 T2第二侧振荡在通道3以下时很严重。
该原理图基于 PMP8878 (TI 参考设计)。如何消除振荡?
与参考设计不同、我使用的 T2模型是 DCR 为3.3欧姆的 LPD5030V-224MEB、而参考设计使用 DCR 为5.25欧姆的 LPD5030V-224MRb。
振荡是否由较小的直流等效电阻引起?
Regars、
邵伟。