请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:LMR54406 主题中讨论的其他器件:TPS54540B、
客户想知道如何在测量纹波/噪声时选择示波器的带宽设置。 它是否与开关频率有关?
是否有文章指导此测量? 谢谢。
TPS54540B (FSW=500kHz)
LMR54406 (FSW=1.1MHz)
此致
布赖恩
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好、Brian、
我 在这里链接了一篇有关测量电源转换器输出上纹波电压的有用文章。 这将指导您找到用于测量纹波的最佳物理设置、并在探头上的 VOUT 和 GND 之间形成一个非常紧密的环路。 我推荐使用尾纤或同轴电缆。 通常、我会将示波器设置为交流耦合以忽略直流电平、然后添加20MHz 的带宽限制、以便真正获得没有噪声的纯净信号。
此致、
亨利