This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS37-Q1:无 VDD 的偏置感应

Guru**** 1144270 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1312273/tps37-q1-bias-sense-without-vdd

器件型号:TPS37-Q1

大家好、

对感测和 VDD 电压斜升/斜降顺序有任何要求吗?

从绝对最大额定值的角度来看、两个引脚都具有70V 额定电压、因此即使在没有 VDD 的情况下对 SENSE 引脚施加偏置、也应该不会出现问题。  

SENSE 到 VDD 是否有泄漏路径?

此致、

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    大家好、

    感谢您的提问。 我向我的团队核实了这一点、从 SENSE 到 VDD 没有路径。 它们是独立的。

    此致、

    A·西拉