This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS61046:电感器选择纹波比

Guru**** 1204210 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1278404/tps61046-inductor-selection-ripple-ratio

器件型号:TPS61046

您好、应用手册 SLVA372D–2022年11月修订(见下方所附)提到、在 CCM 升压设计中、电感器电流为输出电流的20%到40%。 我想它应该是输入直流平均电流的百分比。 请您确认。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 KrnB:

    这是一个错误。

    建议纹波电流占电感器电流的百分比、即输入电流。

    感谢您的指出。 我们稍后会进行修改。

    此致

    费格斯