This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS274160:CS 引脚上拉问题

Guru**** 1183630 points
Other Parts Discussed in Thread: TPS274160, TPS274160EVM
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1267644/tps274160-problem-with-cs-pin-pull-up

器件型号:TPS274160

尊敬的:

如,TPS274160EVM 评估板的图 Δ 所示、CS 引脚连接到一个上拉电阻器。 上拉电阻器的功能是什么? 然而、在 TPS274160的数据表中、典型应用图表未显示上拉电阻器、我是否需要 CS 引脚的上拉电阻?

      

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Anna、  

    CS 引脚具有内部上拉电阻器、因此无需使用上拉电阻器。  

      

    此致、  

    伊丽莎白