This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ25628EVM:为什么 BQ25628EVM 在充电时无法由 QON 复位?

Guru**** 1178510 points
Other Parts Discussed in Thread: BQ25628EVM
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1253507/bq25628evm-why-the-bq25628evm-cannot-be-reset-by-qon-when-it-on-charge

器件型号:BQ25628EVM

我使用 BQ25628EVM 测试 QON 复位功能、并发现仅 QON 可将 BQ25628EVM 复位在非充电状态(无 VBUS、或在存在 VBUS 时禁用充电)。 那么、我的问题是、我可以在 BQ25628EVM 充电时通过 QON 对其进行复位吗?  

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!  

    有关 RESET 功能的完整说明、请参阅第9.3.9节 BATFET 控制。 我已在 BQ25628EVM 上确认、只要 BATFET_CTRL_WVBUS = 1 (REG0x18位3)、QON 就可用于充电期间的系统复位。  

    此致、

    加勒特