This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ27Z746:可在没有外部 NTC 的情况下运行?

Guru**** 2553260 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1218200/bq27z746-possible-to-operate-without-external-ntc

器件型号:BQ27Z746

你(们)好!

我们希望 在用于磁共振成像环境的电池组中使用此器件。

考虑到这一点,禁止使用铁磁材料,这使许多/大多数 NTC 都无法使用。

我的问题是、是否可以将监测计配置为单独使用内部传感器而不使用外部 NTC?

提前感谢。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    这应该是可能的。 有关详细信息、请参阅以下列出的 TRM 章节

    3.4温度

    4.3.5温度保护