This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM7480-Q1:是否可以单独对 VS 引脚供电以节省功耗?

Guru**** 2546570 points
Other Parts Discussed in Thread: LM7480-Q1

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1381181/lm7480-q1-could-vs-pin-be-powered-separately-to-save-power-consumption

器件型号:LM7480-Q1
Thread 中讨论的其他器件: LM74800-Q1

工具与软件:

大家好、团队成员:  

在以下原理图中、LM7480-Q1用于驱动 Q1。 而 Vout2将小于 VBAT。

因此、客户想知道 Vout2是否可用于驱动 LM7480-Q1的 vs 引脚以节省功耗、即使这样也可以节省一点点。

谢谢!

Marc

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Marc:

    您似乎在仅理想二极管模式下使用 LM74800-Q1来驱动 Q1。 如果我错了、请更正我。 在这种情况下、我们可以使用 VOUT1来为 VS 供电、但不能使用 VOUT2。

    此致、

    Shiven Dhir